Epson WorkForce 600 Series Drivers Software
This Epson WorkForce 600 printer has a Letter flatbed scanner size, capable of scanning documents at 1,200 dots per inch directly to a PC, or a memory card / pen drive. It goes without saying that 1200dpi resolution is like scanning a ceiling that even small office printers rarely touch on. A photo that comes out is either at 300 or 600 dpi maximum so it’s not usually needed, unless you need to subtly edit it in Photoshop. The Epson WorkForce 600 can also scan documents in JPEG or PDF.
Epson WorkForce 600 has a Copy setting that can also be adjusted to print photos. Furthermore in the settings menu, there is an option to restore / color the old photo or copy the CD cover to the CD with complete instructions from the photo / CD feature in the scanner to place the disk into the printer.
Epson WorkForce 600 uses the same 6 ink system to make the right tones of color for photo printing. In the best quality mode, this printer is able to provide amazing photo prints. These Epson inks are dye-based inks and this is another reason why molds scream passionately at color. Dye-based inks dissolve in water and are more likely to smear (vs. pigment-based inks) and they make colors brighter.
This file contains everything you need to use your WorkForce 600.
This combo package consists of the following items:
- Printer Driver v6.66
- Scanner Driver v3.49
- Epson Status Monitor 3
- Epson EasyPrint v3.10
- Epson Event Manager v2.30.01
Windows 10 64-bit, Windows 8.1 64-bit, Windows 8 64-bit.
Download (40.1 MB)
This file contains the WorkForce 600 EPSON Scan Utility and Scanner Driver (TWAIN) v3.49
Windows 10 32-bit, Windows 10 64-bit, Windows 8.1 32-bit, Windows 8.1 64-bit, Windows 8 32-bit, Windows 8 64-bit, Windows 7 32-bit, Windows 7 64-bit.
To scan using the product’s control panel, you must also download and install the Event Manager Utility after installing this file.
Download (11.9 MB)
This file contains the ICA Scanner Driver v5.8.7 for Apple’s Image Capture utility
- Double-clicking this file creates a disk image on your desktop
- Open the disk image
- Double-click the installer icon to begin the installation
macOS 10.14.x, macOS 10.13.x, macOS 10.12.x, Mac OS X 10.11.x, Mac OS X 10.10.x, Mac OS X 10.9.x, Mac OS X 10.8.x, Mac OS X 10.7.x, Mac OS X 10.6.x.
This file applies to numerous Epson products and may be compatible with operating systems that your model is not.
Download (15.2 MB)
This file contains the Recovery Mode Firmware Update version SZ18C5 for the Epson WorkForce 600.
- This firmware update should only be used if your printer’s control panel displays a Recovery Mode error
- A USB cable is required
- Make sure no other USB devices are connected to the computer during the update process
- Do not unplug, power-off or attempt to use the printer during the update process
- This update may take up to 15 minutes to complete
- Download the file
- Double-click the downloaded file to create a disk image on your desktop
- Open the disk image
- Double-click the installer icon to begin the update process
This file is for use with Mac OS X v10.5.x – macOS 10.12x.
macOS 10.14.x, macOS 10.13.x, macOS 10.12.x, Mac OS X 10.11.x, Mac OS X 10.10.x, Mac OS X 10.9.x, Mac OS X 10.8.x, Mac OS X 10.7.x, Mac OS X 10.6.x, Mac OS X 10.5.x.
Download (19.5 MB)